PRODUCTS
PRODUCTS
‹
›
‹
›
Product Details
3D printing wire refers to linear consumables used in fused deposition modeling (FDM) technology. Its main raw materials include polylactic acid (PLA), PETG, ABS, nylon, etc. Among them, PLA is made from renewable plant resources and belongs to bio based biodegradable materials. The common wire diameter is 1.75mm.
PLA, ABS, and PETG, as mainstream wires, have differences in printing temperature, mechanical properties, and applicable scenarios. PLA printing temperature is about 190-210 ℃, with low risk of edge curling and high hand friendliness, but poor toughness and average heat resistance; ABS printing has a higher temperature and requires a hot bed for better strength and heat resistance, but there is an odor during printing; PETG performance falls between the two. All FDM wires are prone to moisture absorption, improper storage can affect printing quality, and moisture-proof measures such as drying ovens should be used.
Low shrinkage rate, accurate diameter (± 0.02 millimeters), and no bubbles.
The nozzle is not clogged, the printing is smooth, and the melting point is stable.
You can choose or customize various colors.
Compatible with most 3D printing devices on the market.
Good physical properties: ABS carbon fiber consumables have higher strength and rigidity, stronger impact resistance and wear resistance, which are more important than ordinary ABS black silk materials. The molding effect is very good. Suitable for applications requiring torsional strength, tensile strength, and impact strength.
Neat wrapping: The circular tube lines are wrapped neatly! The lines are arranged neatly, the output is stable, the shaft support is smooth, the diameter is 1.75 millimeters, and the dimensional accuracy is+/-0.02 millimeters. This will result in smoother printing and will not clog the nozzle.
Wide industrial applications: Carbon fiber filament 3D printing materials achieve lightweight and durability, suitable for various applications that require torsional, tensile, and impact strength, such as functional prototypes, tools, fixtures, terminal parts, pump impellers, mechanical gears, precision and engineering components, widely used in robotics, drones, automotive and aerospace industries.
Colors Available
live shooting
Company Introduction
Shandong Linhai International Trade Co., Ltd. manufactures environmentally friendly, safe, and high-performance specialty polymer materials. Our main products include reagents, organic compounds (DTPA, EDTA, diethylene glycol, and p-hydroxyacetophenone), inorganic compounds, polymer materials, and food additives.
We possess advanced production equipment and a technical team with extensive industry experience and expertise. We have established a strict production management system and are certified to ISO9001 quality management systems.
We prioritize product safety, environmental protection, and social responsibility. Our core products comply with food contact material standards and regulations issued by major countries and regions worldwide, including those issued by the National Health Commission of China, the U.S. Food and Drug Administration, the Ministry of Health, Labour, and Welfare of Japan, and the European Commission. These products meet the increasingly stringent safety and environmental requirements of food contact materials and medical supplies.
Online Consultation
Get in Touch
*We respect your confidentiality and all information are protected.